컨텐츠 바로가기


상품검색

검색

고객 상담 안내

  • tel031-946-1934
  • fax031-946-1924
  • time평일:10:30~6:30
    토요일:10:00 AM~03:30 PM
    (일/국경일 휴무)

    점심 12시~1시 입니다.

    오프라인 방문시 5시전에
    미리 문의 주세요.

    ---- 입금계좌 안내 ----
    농협: 302-0656-8556-71
    예금주: 김성준(건몰)

현재 위치

  1. R/C - 자동차

이전 제품 보기

다음 제품 보기

크게보기

[P0000FJD] SERPENT 1/8 EP Cobra Buggy Be 2.0 품절 적립금

() 해외배송 가능

SERPENT 1/8 EP Cobra Buggy Be 2.0 기본 정보
판매가
소비자가 0원
적립금
  • 0 (0%)
  • 무통장 결제시 적립금 0( %) 무
  • 카드 결제시 적립금 0( %) 카
  • 실시간 계좌 이체시 적립금 0( %) 실
  • 적립금 결제시 적립금 0( %) 적
  • 휴대폰 결제시 적립금 0( %) 휴
무이자할부
제조사 SERPENT
원산지 The Netherlands
상품코드 P0000FJD
KC인증번호
수량

updown

국내/해외배송
재고
KC인증번호
검사증번호
SNS 상품홍보

장바구니 담기 관심상품 등록 추천 메일 보내기

쇼핑 계속하기 바로 구매하기

Coupon Download

전체쿠폰 다운로드 받기

  • 20만원 이상 구매적용

    5000원 할인

    사용기간 : 발급일로부터 30일 이내

    쿠폰 다운 받기

상품상세정보

SERPENT 1/8 EP Cobra Buggy Be 2.0 입니다..

 

Description
 

Introduction
 
Serpent Cobra 811 Buggy Be 2.0 1/8 4wd

Main new features
- new wider rear end with new geometry for more rear traction and an easier handling car with wider sweetspot
- rear shockabsorbers moved to the back of the shocktower
- longer rear shocks; with longer housing and shockrods for more travel
- rear wing with integrated holders for the ballraced rear anti-roll bar
- longer rear lower arms, new higher carbon shocktower, longer rear shock, new upright
- lexan mud-guards to mount on lower rear arms
- nylon mud-scrapers mount on the rear uprights
- improved differential gears - as already in the Be version
- larger bearings in steeringblocks and uprights 8X16X5 (2) and 15x21x4 (2),
- transmission using larger bearings 8x19x6 and 13x19x4 and new couplers for extra durability –

The kit includes car, clear body with mask, 4 racing wheels, rear wing, decal and full color manual. The full package to compete in high end racing, finish finals and win ! Shipping middle of march 2013.


 

 


 


This new development for  Cobra buggy is realized after another full year of racing across the globe, listening to feedback from many (team)-drivers and dedicated testing on many different surfaces.  The feedback from the drivers on the Cobra Buggy in general is very good, the durability is rated as best in the market, the shocks are toprated, and the diffs and drivetrain with new gears and larger bearings can now withstand any rigors and will last and last !   According to same drivers a more responsive rear end, combined with a bit more steering would bring the Cobra on the highest level. 

Well, the changes as below accomplish just that, and for sure we will continue the superb quality on the kit overall   !

Key changes  for the 2.0 version
-   Improved rear geometry with wider rear lower arms, new uprights and new shock position
-   Longer rear shocks and higher rear carbon shocktower for more travel
-   Shocks moved to the back, to make access and adjusting easier, and make rear end more stabile and responsive
-   rear wing with integrated holders for the ballraced rear anti-roll bar
-   lexan mud-guards to mount on lower rear arms
-   nylon mud-scrapers mount on the rear uprights
-   improved differential gears - as already in the Be version
-   larger bearings in steeringblocks and uprights 8X16X5 (2) and 15x21x4 (2),
-   transmission using larger bearings 8x19x6 and 13x19x4 and new couplers for extra durability –

Chassisplate  
Chassisplate in  3mm  7075 T6 aluminium , with machined pockets to create flex  make lighter.  Kick-up angle on front  for stabile landings.  Countersunk holes.   Slots to locate the  front and rear suspension mounts precisely.  Angled sides to increase stiffness.  Laser engraved Cobra logo.  
  
Bumper   
Aligned with chassis  kikc-up for precise landings and to protect front suspension holde rand anti-roll bar.
  
Chassis stiffners  
Composite  stiffner front and rear, to give extra stiffness, but still allow some flex as needed.  
  
Central radio / servo mount  
Composite compact radiobox which offers good space for the  steering servo and the receiver .   The whole assembly including linkages can be taken off easily and fast in one go, when cleaning the car, or doing maintenance.

Battery-cases / side-guards
The main eyecatchers are the extremely low laydown longtudinal placed battery-packs at each side of the car, being part of the side-guards, securely fastened with a flip-lid, for easy and fast battery changes. The weight low in the car and in the right position, well balanced. The Lipo holders comply with ROAR legal packs / dimensions.

Motormount:
The motor is placed in the most optimal position in the car, keeping motor-forces and transmission parts / alignment in mind.  Only one-screw  is needed to secure  the BL motor, in the nicely designed durable machined aluminium motormount. Space for additional motor-cooling available as needed.
The space for the motor allows a maximum motor-length of 70mm, which covers most widely used motors ( except for the truggy / monstertruck motors).
   
Suspension brackets  
Beautifully machined  7075 T6  suspension brackets in anodized, laser angraved.  Precision fit for the nylon roll center inserts  and pivot balls / pins.   
  
Steeringblocks assembly   
Composite steeringblocks combined with 10 dgr C-hubs  for precise steering.  Spring steel wheel-axles with large size bearings    and larger inner     with precision threaded aluminum wheel-hubs with offset  . Flanged and serrated wheel nuts to guarantee that you will not loose a wheel nut in a race.
  
Front suspension  
Durable oversized  lower suspension arms in strong composite nylon. On the lower side the special shaped downstops screws are mounted. The lower shock-mounting pins are secured with a small grubscrew from the bottom.   
  
Front anti-roll bar  
The ballraced front anti-roll bar  system, consist of a spring steel bend wire, which is guided through the diff-cases and runs in ballraced steel adaptors.  The wire is linked to the lower suspension arm, with a captured adjustable threaded pivotball, for very precise and low friction  operation and easy tuning.  
  
Shocktower and bodymounts front  
4.5mm thick carbon shocktower with 5 upper positioning holes for the shocks and and 6 holes for roll-center positions.  1 centrally located adjustable bodymount , and 2 forward mounted adjustable bodymounts, all with flip-tops.   
  
Angled steering system / servo saver  
The bell cranks are angled to reduce the angle of difference between the total caster and steering plane. Therefore you will have less bump steer and a truer steering Ackerman through the entire range of suspension  
  
Ackermann plates  
With the design of the steering bell cranks when changing the Ackermann you will not need to adjust your steering tie rods. You simply will only need to adjust your end points on your radio..   
  
Rear suspension arms  
Durable longer oversized  lower suspension arms in strong composite nylon. On the lower side the special downstops screws are mounted. The lower shock-mounting pins are secured with a small grubscrew from the bottom.   

Mud-guards
Superlight polycarbonate mud guards  mount to the new lower suspension arms, and will keep dirt away from your anti-roll bars transmission and wheels.
  
Rear  uprights  assembly  
Composite uprights with 3 upper roll-center positions. Strong steel track-rods with L/R threading and strong balljoints  to pre-set camber.  Spring steel wheel-axles with large size bearings   and larger inner   ones  with precision threaded aluminum wheel-hubs with offset  . Rubber dustcovers in the rear to protect the cvd system and keep the lubrication inside. Flanged and serrated wheel nuts to guarantee that you will not loose a wheel nut in a race.  

Mud scrapers
Composite mud scrapers which mount to the new uprights, and will keep the inside of your wheel cleaner in case of muddy  conditons. Kept on the bigger size, so may need to grind to fit your brand of wheels.
  
Rear anti-roll bar  
The ballraced front anti-roll bar  system, consist of a spring steel bend wire, which is guided through the rear wingmount and runs in ballraced steel adaptors.  The wire is linked to the lower suspension arm, with a captured adjustable threaded pivotball, for very precise and low friction  operation.  
  
Shocktower rear   
4.5mm thick carbon shocktower, integrated into the rear section for extra stiffness,  with 5 upper positioning holes for the shocks and 6 holes for roll-center positions.   
  
Wingmount and bodymounts rear  
Composite rear wing, with strong nylon adjustable rear bodymounts on wide body-support bridge located far enough to the rear, to support the bodies in best way.   
  
Captured pivot pins and balls and bolted hinge pins   
All spring-steel hinge pins are either captured or bolted in place and made in spring-steel quality. This insures your chances to finish an hour long main event, while battling for the lead.  This relieves stress on the hinge pin when adjusting the kick up, or anti squat. Your pin is free to rotate to any angle without binding.  
  
Shockabsorbers RCM big-bore 16mm  
Hard Teflon coated threaded  shockbodies with 4mm shock-rods.  Hard anodized aluminium screw on shock-tops with Serpent laser engraving.   Pre-load adjusters with o-rings inside.  Shocks use  large diameter membrames and large diameter o-rings  and bushings to create a  supersmooth  and leak-proof package.  Large diameter pistons are held in place by a nut on the polished shock-rods tops. Open type spring retainer to let dirt out easy.  The shock-shafts are protected by rubber boots.  
  
RCM shock springs  
Colorcoded progressive shock springs are supplied for the 1st standard set-up  and all springs are grinded flat top and bottom, and checked individually for tension and length and matched.    
    
Compact geardifferentials  
Very compact gear differentials with very smooth metal sintered gears, and steel shaft. Perfect sealing case with special gasket and o-rings.  Very light and durable outdrive cups in spring-steel.   Hardened spring-steel diff-coupler 13T with connector running in 2 oversized bearings  The Cobra-E uses a 13T / 44T combo gearing.  46T central diff gear.   This drive ratio will provide amazing acceleration combined with the low vehicle weight.
  
Front and rear cvd-sets  
Both front and rear captured  driveshafts are being used with CVD system.  Durable yet light  spring steel engraved driveshafts with hard steel pins.  
  
Spring steel transmission parts  
The front and rear thin but strong spring steel cardan shafts connect the differentials .    

Body
Serpent superlow Cobra E buggy body  with film and masking tape is included in the kit.

Rear wing:
Low version strong rear white aero rear wing is included for great downforce and straight line stability.

Oils and grease  
The shock-oil, diff oil and some grease is supplied to meet the standard set-up.   
  
Manual and set-up  
Full color manual with easy to follow assembly steps, exploded views for easy spares ordering, a blank and standard set-up sheet for a good start set-up.   
  
Decals  
Black and white promo body-decals ; Serpent generic and Cobra ones.   
  
Packing  
Parts are packed according to the  steps explained in the manual.   
  
Service and Support   
The Serpent distributor, dealer or agent is your source for more info, but also the Serpent website and  the member section and the Youtube channel provides lots of information.

상품결제정보

고액결제의 경우 안전을 위해 카드사에서 확인전화를 드릴 수도 있습니다. 확인과정에서 도난 카드의 사용이나 타인 명의의 주문등 정상적인 주문이 아니라고 판단될 경우 임의로 주문을 보류 또는 취소할 수 있습니다.  

무통장 입금은 상품 구매 대금은 PC뱅킹, 인터넷뱅킹, 텔레뱅킹 혹은 가까운 은행에서 직접 입금하시면 됩니다.  
주문시 입력한 입금자명과 실제입금자의 성명이 반드시 일치하여야 하며, 5일 이내로 입금을 하셔야 하며 입금되지 않은 주문은 자동취소 됩니다.

배송 정보

  • 배송 방법 : 택배
  • 배송 지역 : 전국지역(제주, 도서지역 추가 5,000원)
  • 배송 비용 : 3,500원
  • 배송 기간 : 1일 ~ 3일
  • 배송 안내 : 고객님께서 주문하신 상품은 입금 확인후 배송해 드립니다. 다만, 상품종류에 따라서 상품의 배송이 다소 지연될 수 있습니다. 산간벽지나 도서지방은 별도의 추가금액을 지불하셔야 하는 경우가 있습니다.

교환 및 반품 정보

교환 및 반품이 가능한 경우
- 상품을 공급 받으신 날로부터 일주일이내 도착분에 한해 가능합니다. 내.외 포장이 훼손되어 상품가치가 상실된 경우, 제품을 한번이라도 작동한 경우와 공급받으신 상품 및 용역의 내용이 표시.광고 내용과 다르거나 다르게 이행된 경우. 일주일 이후 도착분에 대해서는 어떠한 경우라도 교환/반품이 불가능합니다.

교환 및 반품이 불가능한 경우
- 단순변심에 의한 반품이나 교환.
- 고객님의 책임 있는 사유로 상품등이 멸실 또는 훼손된 경우.
- 내.외 포장이 훼손되어 상품가치가 상실된 경우.
- 고객님의 사용 또는 일부 소비에 의하여 상품의 가치가 감소한 경우.
- 시간의 경과에 의하여 재판매가 곤란할 정도로 상품등의 가치가 감소한 경우.
- 배터리나 가스 비비탄등의 사용여부가 불가능한 제품.
- 모든 부품과 옵션은 교환 및 반품이 불가능합니다. (호환이 안되요, 잘못 구매했어요, 뜯지도 않았어요 <- 이런것은 사유가 절대 되지 않습니다!!)

※ 교환, 반품을 하실 경우 상품반송 비용은 고객님께서 부담하셔야 합니다. 

서비스 문의

통화가 안되는 경우 게시판을 통해 문의해 주시기 바랍니다.. 성심껏 처리해 드리겠습니다.. A/S 관련 내용은 여기를 클릭하세요..

상품 사용 후기

상품의 사용후기를 적어주세요.

게시물이 없습니다

모두 보기 사용 후기 쓰기

상품 Q&A

상품에 대해 궁금한 점을 해결해 드립니다.

게시물이 없습니다

모두 보기 상품 Q & A 쓰기